Asiga Cure 1.5 curing unit

Description

Asiga Cure 1.5 is an advanced post-curing unit for 3D printed resin materials. It combines vacuum, dose-controlled light curing and IR heating to provide quantifiable, repeatable curing even when chamber load varies.

Intelligent curing

Integrated light sensors measure the actual light dose reaching objects in the chamber, allowing curing to be controlled by delivered energy rather than time alone. This reduces variation between small and large batches.

Vacuum and heat

• The integrated vacuum pump reduces oxygen inhibition that can otherwise leave sticky surfaces.
• IR heating up to 80 °C helps materials achieve intended mechanical and thermal properties.
• External inert gas can be connected when required by a specific material or workflow.
• Custom curing profiles can be created and saved directly in the interface.

Material flexibility

Cure is designed as an open post-curing system and can be used with resins from different manufacturers when their curing requirements are known. Always follow the current IFU for dental and biocompatible materials.

Technical data

• Chamber volume: 1,5 l
• Chamber size: 143 × 199 × 60 mm
• Technology: vacuum chamber, dose curing, IR heating and inert gas connectivity
• Maximum temperature: 80 °C
• Internal light sensors measure the actual light dose in the chamber
• Integrated vacuum pump reduces oxygen inhibition and sticky surfaces
• External inert gas such as nitrogen can be connected
• Pre-loaded and customisable curing profiles
• Connectivity: Wi-Fi, Wireless Direct och Ethernet
• Dimensions: 360 × 330 × 240 mm
• Weight: 15 kg
• Power: 100–240 V AC, 50/60 Hz, max 2,8 A
• Warranty: 12 månader