Sagemax NexxZr T translucent 10 mm
Translucent high-strength zirconia for crowns, frameworks and multi-unit bridges in both anterior and posterior regions. Size: 98 × 10 mm.
Watch this product and we will notify you once it is back in stock.
Sagemax NexxZr T translucent 10 mm
Description
Sagemax NexxZr T Translucent is a pre-sintered zirconia with very high flexural strength and medium translucency. The material is designed for durable monolithic and anatomically reduced restorations and is suitable for applications ranging from single crowns to extensive bridge constructions.
Product facts
- Type: Translucent high-strength zirconia
- Design: Homogeneous and monochromatic material without multilayer gradation
- Material: Yttria-stabilised zirconium oxide
- Material class: 3Y-TZP
- Flexural strength: Approximately 1,270 MPa
- Translucency: Approximately 42%
- Fracture toughness: More than 5.0 MPa·m1/2
- ISO classification: Type II, class 5 according to EN ISO 6872
- Shades: White, OM1–OM3 and classic A–D shades
- Formats: W-98 and Z-95
- Size: 98 × 10 mm
Benefits
The combination of very high strength and medium translucency provides a broad range of indications. The material offers reliable stability for extensive bridges while supporting aesthetic monolithic restorations. Its soft quality in the pre-sintered state facilitates milling, separation and finishing and may help extend the service life of milling tools.
Shade and aesthetics
The material is homogeneous throughout the disc and does not contain an integrated shade or translucency gradient. The pre-shaded versions provide a uniform base shade, while the white version can be individually coloured before sintering with compatible NexxZr Coloring Liquids. After sintering, the restoration can be completed by polishing, staining and glazing or ceramic layering.
Applications
Suitable for anterior and posterior single-unit restorations, 3-unit bridges and multi-unit bridges with a maximum of two connected pontics. The material can also be used for anatomically reduced frameworks and conical telescopic copings.
Processing
The material is supplied in a pre-sintered state and is milled in a compatible dental CAD/CAM system. Processing options include infiltration before sintering and staining and glazing, cut-back or full ceramic veneering after sintering. Recommended wall thicknesses, connector dimensions and sintering programmes must be observed when designing bridges.