Die spacers and die coatings are used to treat prepared dental dies and establish a defined internal space in prosthetic restorations. The range includes coloured die spacers with different stated film thicknesses, thinners and surface hardeners. These products are primarily used in crown and bridge workflows where fit and cement space require control. Coating selection and application should follow the restoration design and manufacturer’s instructions.
-
Bredent Spacer LC Transpa-Transcl 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
BR54001006
Add to favorites -
Bredent Thinner for die spacer 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
54000701
Add to favorites -
Dreve Plaquit light-curing lacquer 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
DR38124
Add to favorites -
Renfert Spacer die:master Blue 15 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
R1956-0300
Add to favorites -
Renfert Spacer die:master Duo 15 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
R1956-0600
Add to favorites -
Renfert Spacer die:master Gold 15 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
R1956-0500
Add to favorites -
Renfert Spacer die:master Red 15 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
R1956-0200
Add to favorites -
Renfert Spacer die:master Silver 15 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
R1956-0400
Add to favorites -
Renfert Spacer die:master Thinner 30 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
R1956-0700
Add to favorites -
Smile Line Tecno-Skin Hardener 2 x 8 ml
Hardener/catalyst for model fabrication, duplication, gingival reproduction or other laboratory procedures requiring an elastic moulding material.
153-5099
Add to favorites -
Taub Tru-Fit Spacer Silver 15 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO038
Add to favorites -
Taub Tru-Fit Thinner
Thinner for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO036
Add to favorites -
Yeti Die Hardener 0 µm 20 ml
Hardener/catalyst for model fabrication, duplication, gingival reproduction or other laboratory procedures requiring an elastic moulding material.
ISO204
Add to favorites -
Yeti Die Spacer Thinner 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO203
Add to favorites -
Yeti Die Spacer, blue 10 µm 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO200
Add to favorites -
Yeti Die Spacer, clear 3 µm 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO206
Add to favorites -
Yeti Die Spacer, dentin 10 µm 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO207
Add to favorites -
Yeti Die Spacer, red 7 µm 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO202
Add to favorites -
Yeti Die Spacer, silver 13 µm 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO201
Add to favorites -
Yeti Die Spacer, yellow 7 µm 20 ml
Die spacer for controlling cement space or viscosity in die-spacer systems for crown and bridge work.
ISO205
Add to favorites
Creating controlled cement space
Die spacer is applied to a prepared die to provide planned relief between the restoration’s internal surface and the tooth. Appropriate cement space can aid seating, but the coating should not compromise critical marginal areas. Follow the restoration material and system manufacturer’s guidance.
Colour and film thickness
Selected products specify film thicknesses such as 3, 7, 10 or 13 micrometres. Colours help distinguish coatings and monitor application, but do not represent a universal thickness code. The final layer thickness depends on the product, number of coats and application technique.
Thinners and die hardeners
Dedicated thinners may be used to adjust consistency where the manufacturer permits it. Die hardeners and surface sealers reinforce vulnerable stone surfaces. Their purpose differs from spacer coatings intended to create cement relief.
Accurate dies start with the model
A die should be clean, dry and mechanically sound before coating. The choice of precision dental stone and suitable die systems are therefore relevant to the result.
Frequently asked questions
What is the difference between die spacer and die hardener?
Die spacer creates a controlled coating for planned cement space. Die hardener strengthens or seals the surface of a model die.
Does each coat always give the same thickness?
No. Film thickness varies with the product, application method and surface. Follow the manufacturer’s stated specifications.